This post includes affiliate links, for which we may earn a commission at no extra cost to you should you make a purchase using our links. As an Amazon Associate, we can earn from qualifying purchases. Learn more.

Best Budget DDR5 RAM [2022]

DDR5 RAM

DDR5 has been around for a while now. Yet it is difficult to find a memory chip that will not cost you a small fortune.

There are several reasons why that is, but we will get into that in just a minute. Before anything else, one must know precisely what you stand to gain by using DDR5 RAM.

Besides being 50% faster than DDR4, you get lower latency and power consumption that play their part in delivering high performance. Lower power consumption is a bit of a misnomer as consumption goes up when you tweak the clocking rates.

The DDR5 RAM modules are not cheap. It has become an industry norm for new technologies to come at a price premium. However, that is not the only reason why DDR5 RAM modules cost what they do.

The global shortage of chips is playing a considerable part in driving up prices. Further, the cost of manufacturing the DDR5 RAM module is higher. It requires more components per unit. This means that even when the availability stabilizes, you cannot expect the prices to come down significantly.

Therefore, people looking to upgrade to DDR5 must look at some budget-friendly options for DDR5 RAM modules. Let go of features like aesthetics, higher clocking rates, RGB lighting, or heat shields, and you can make considerable savings. Further, you must take some time and assess your computing needs.

Not everybody needs a 64GB or 32GB RAM component. Hence, you must assess your current requirement. Provide for enhancements in the next few years only if you foresee a change. And only then consider upgrading.

In this article, we bring you the best DDR5 RAM modules you can buy without causing heartburn. Our buying guide will help you decide on the suitable chip for your need. Finally, we will answer some FAQs to address questions you may have.

Comparison of the Best Budget DDR5 RAM

ImageProductDetailsCheck Price
Kingston Technology Fury Beast on Amazon
Kingston Technology Fury Beast Module Type: DDR5 288 Pin
Frequency: 4800MHz
Latency: CL38
Capacity: 16GBX1
Voltage: 1.1V
Buy on Amazon
Crucial RAM 16GB DDR5 on Amazon
Crucial RAM 16GB DDR5 Module Type: DDR5 288 Pin Unbuffered DIMM
Frequency: 4800MHz
Latency: CL40
Capacity: 16GBX1
Voltage: 1.1V
Buy on Amazon
TEAMGROUP Elite DDR5 32GB Kit on Amazon
TEAMGROUP Elite DDR5 32GB Kit Module Type: DDR5 288 Pin Unbuffered DIMM
Frequency: 4800MHz
Latency: CL40-40-40-77
Capacity: 16GBX2
Voltage: 1.1V
Buy on Amazon
PNY Performance 8GB DDR5 (PC5-38400) on Amazon
PNY Performance 8GB DDR5 (PC5-38400) Module Type: DDR5 288 Pin Unbuffered DIMM with On-die ECC
Frequency: 4800MHz (PC5-38400)
CAS Latency: CL40
Capacity: 8GBX1
Voltage: 1.1V
Buy on Amazon
Mushkin Essentials – DDR5 Desktop DRAM on Amazon
Mushkin Essentials – DDR5 Desktop DRAM Module Type: DDR5 288 Pin Unbuffered DIMM
Frequency: 4800MHz (PC5-38400)
CAS Latency: CL40
Capacity: 16GBX2
Voltage: 1.1V
Buy on Amazon
ADATA Premier DDR5 4800MHz 16GB on Amazon
ADATA Premier DDR5 4800MHz 16GB Module Type: DDR5 288 Pin Unbuffered DIMM with On-die ECC
Frequency: 4800MHz
CAS Latency: CL40
Capacity: 16GBX1
Voltage: 1.1V
Buy on Amazon
Patriot Signature Line Series DDR5 on Amazon
Patriot Signature Line Series DDR5 Module Type: DDR5 288 Pin Unbuffered DIMM with On-die ECC
Frequency: 4800MHz
CAS Latency: CL40
Capacity: 8GBX2
Voltage: 1.1V
Buy on Amazon
GeIL Polaris RGB DDR5 RAM on Amazon
GeIL Polaris RGB DDR5 RAM Module Type: DDR5 288 Pin Unbuffered DIMM with On-die ECC
Frequency: 4800MHz
CAS Latency: CL40
Capacity: 16GBX2
Voltage: 1.1V
Buy on Amazon

1. Kingston Technology Fury Beast – Best Overall

The Fury Beast RAM module from Kingston has a no-fuss design. It offers you the basic DDR5 RAM and all the key elements that come with it. It is economical, and most users would love the comfort of a renowned brand.

The design is simple. You do not get a fancy casing or RGB lighting. The heat dispensation takes place courtesy of the heat spreader design of the ordinary-looking casing.

On the performance side of things, the RAM comes with a 4800MHz clocking speed with the KF548C38BB model. Alternately, you can scale this to 5200MHz with the KF552C40BB model. Thus, you get a DDR5 RAM rated 50% higher in terms of speed over the DDR4 RAM.

Latency parameters hover at the CL38 mark, and there is little that you can do to tweak it. Speaking of tweaking, the Fury Beast offers Intel’s XMP 3.0. Thus, you can play around with the setting to find the ideal configuration to run your RAM.

The Fury Beast also offers On-Die ECC (ODECC). This helps to help maintain data integrity during times of peak usage.

Finally, the top four motherboard manufacturers, MSI, ASROCK, Gigabyte, and Asus, stamp their approval (figuratively) for the Fury Beast.

Key Features

  • 4800MHz Clocking Speed and CL38 Latency
  • Intel XMP 3.0
  • Heat Spreader design

Pros

  • Heat management keeps the RAM cool during times of peak usage
  • Intel XMP 3.0 allows you to tweak essential performance settings to suit your need
  • Approval of leading manufacturers means you ensure compatibility with their motherboards
  • 4800MHz DDR5 delivers 50% faster RAM speed than DDR4

Cons

  • No 8GB model for basic usage needs

2. Crucial RAM 16GB DDR5 – Best Mid-Range DDR5 RAM Module

Crucial does not waste time or effort on insignificant things like product aesthetics and presentation with its DDR5 RAM offering. Further, it would be generous to say that it has a minimalistic design. But the minimal design does not mean you get minimal utility.

On the contrary, it gives you all the functionality you expect from a DDR5 RAM and offers capacity options.

By getting rid of the cosmetic features, Crucial manages to keep the prices low. Not only that, it keeps its prices low by offering lower-capacity chips as well. As a result, you can choose from 8GB sticks to 32GB sticks to meet your requirement.

File transfers, 4K video streaming, gaming, and any other task needing high-speed RAM becomes a breeze with DDR5. The DDR5 RAM module is optimized to deliver high performance while consuming less power. Crucial’s DDR5 RAM delivers 4800MHz and comes with an onboard PMIC.

Power Management Integrated Circuit (PMIC) is an onboard chip that manages the module’s power and power distribution. To clarify, the PMIC is not peculiar to Crucial.

The Crucial RAM module offers you Intel XMP 3.0. Fire it up, and you can set the latency to 40-39-39-77 and the voltage to 1.1V.

Key Features

  • 4800MHz Clocking Speed and CL40 Latency
  • Power Management Integrated Circuit
  • Intel XMP 3.0

Pros

  • Intel XMP 3.0 allows you to tweak essential performance setting to suit your need
  • 4800MHz DDR5 delivers 50% faster RAM speed than DDR4
  • Lack of heat spreads leaves plenty of room inside your CPU cabinet
  • Sub-brand of Micron; hence, you get the comfort of a large brand

Cons

  • No Heat spreader may be a cause of concern during peak demand

3. TEAMGROUP Elite DDR5 32GB Kit – Cheapest 32GB DDR5 RAM Module

TeamGroup offers the Elite DDR5 RAM kit with a 32GB capacity. This comes in a 16GBX2 configuration.

TeamGroup is a lesser-known brand compared to others that we have on our list. However, this has its advantages. Think of DDR5 as a RAM standard laid down by JEDEC. This means that you are assured a minimum set of specifications irrespective of which brand of RAM you purchase. TeamGroup Elite gives you the DDR5 standard and the added benefit of an irresistible saving on your purchase.

Like the RAM module from Crucial, the Elite DDR5 module follows a minimalist design. There are no heat spreaders, colorful casing, or RGB lights to brighten up your CPU cabinet. Instead, you get a compact, bare RAM module that saves you considerable space, should you need it.

With regards to performance, you get 4800MHz clocking speeds. Latency parameters measure CL40-40-40-77. Both these parameters are at par with all other similarly priced RAM modules. Thus, rest assured that a low price does not mean low performance. Notably, the RAM module offers you features like On-die ECC and PMIC.

Finally, TeamGroup may lack the pedigree of big brand names. But you must consider that TeamGroup has been in the business since 1997. Further, it is a multinational company with a solid corporate ethos and industry certifications to back its brand promise.

Key Features

  • 4800MHz Clocking Speed and CL40 Latency
  • Power Management Integrated Circuit
  • 32GB (16GBX2) capacity

Pros

  • 32GB capacity will take care of most professional and all daily use case scenarios
  • 4800MHz DDR5 delivers 50% faster RAM speed than DDR4
  • Lack of heat spreads leaves plenty of room inside your CPU cabinet
  • On-Die ECC ensures data integrity

Cons

  • It lacks the strong backing of a big brand name
  • No 8GB modules for modest computing needs
  • No features to enhance the aesthetics of the computer.

4. PNY Performance 8GB DDR5 (PC5-38400) – Best 8GB DDR5 RAM Module

Consider the PNY offering if you are in the market for a modest 8GB capacity RAM module. PNY offers you tremendous flexibility with its DDR5 RAM module offerings.

PNY’s RAM module may not be the cheapest DDR5 module pound-for-pound. But its USP, concerning price, lies elsewhere. It is primarily because of the 8GB and 16GB iterations that serve the need of modest computing needs. Therefore, one does not end up with more RAM than one needs.

The PNY also offers a no-frills design like most budget RAM modules. There are no heat spreaders, no fancy body graphics, or RGB lighting. Just a RAM chip with a sticker that lists the specifications.

PNY Performance DDR5 module comes pretty much the standard offering. You get the 4800MHz clocking speed. Latency parameters measure at CL40-40-40-77. Thus, giving it a 50% speed advantage over DDR4 RAM.

PNY’s on-die features include the Power Management IC (PMIC) to enhance the signaling and power management of the module. Additionally, the module also boasts two temperature sensors. Thus, the PNY RAM module gives you lower power consumption, lower latency, and higher memory efficiency.

Key Features

  • 4800MHz Clocking Speed and CL40 Latency
  • Power Management Integrated Circuit
  • 8GB RAM capacity

Pros

  • 8GB RAM modules take care of all basic level computing needs
  • 4800MHz DDR5 delivers 50% faster RAM speed than DDR4
  • Lack of heat spreads leaves plenty of room inside your CPU cabinet
  • On-die PMIC and temperature sensors help ensure efficiency and stability

Cons

  • No Heat spreader may be a cause of concern during peak demand
  • No RGB lighting for aesthetics
  • It lacks a 32GB module; hence, it’s not suitable for a scenario that demands high RAM capacities

5. Mushkin Essentials DDR5 RAM – Budget DDR5 with Lifetime Warranty and Tech Support

This RAM module from Mushkin offers you the DDR5 standards and is sold under Muskin’s Essentials line of RAM modules. They couple this with the added benefit of a Lifetime Warranty and Tech Support.

Interestingly, Muskin also offers both SODIMM and UDIMM form factors. Thus, laptop users need not feel left out. This model uses the UDIMM for the desktop motherboard.

The design of the RAM module does away with the frills, and you get a basic-looking RAM stick. It is consistent with the design of all low-cost DDR5 modules. Hence, it is best tucked away inside the CPU cabinet and left alone to do what it does best.

It offers a 32GB capacity in a 16GBX2 configuration. You get the 4800MHz clocking speed and latency timing of CL40-40-40. These promise the high speeds that one expects from DDR5 RAM modules.

The features include the standard PMIC and onboard temperature sensors. The Muskin Essentials DDR5 RAM module is Intel XMP 3.0 ready. Therefore, you are all set when you need to tweak performance to match your requirements.

Finally, Muskin offers the dual benefit of a Lifetime Warranty and Tech Support. These come in handy in the unlikely event of component failures.

Key Features

  • 4800MHz Clocking Speed and CL40 Latency
  • Power Management Integrated Circuit
  • Intel XMP 3.0 Ready

Pros

  • Free Technical Support when you need assistance with the installation and operation
  • A lifetime Warranty keeps you covered in case of a problem with the module
  • Intel XMP 3.0 support allows you to tweak the performance
  • On-die PMIC and temperature sensors help ensure efficiency and stability

Cons

  • It lacks the strong backing of a big brand name
  • No 8GB modules for modest computing needs
  • No features to enhance the aesthetics of the computer

6. ADATA Premier DDR5 – DDR5 with Multiple Capacities

The advantage of using the ADATA Premier DDR5 RAM module is not immediately apparent. However, look closely, and you realize you get three options in RAM capacities. It holds an edge over its competitors by offering 8GB, 16GB, and 32GB sticks.

One cannot say much about the design of the module. Like other budget RAM modules, ADATA does away with cosmetic features. It focuses on the task at hand to provide a budget-friendly DDR5 RAM module.

On the performance side, it offers you the standard 4800MHz clocking cycle. Latency times are predictable at CL40-40-40. The ADATA supports Intel’s XMP 3.0 to help tweak the performance.

The onboard PMIC components play their part in reducing power consumption by 30%. ADATA also features On-die ECC that retains data integrity by preventing single-bit errors on the DDR5 components. Thus, you get a stable and reliable RAM module optimized for performance.

By offering the RAM module in 8GB, 16GB, and 32GB modules, ADATA aims to capture a sizable market. These offerings take care of the basics, mid-level, and advanced level requirements quite easily. Nonetheless, high-performance gaming remains a different ball game.

Key Features

  • 4800MHz Clocking Speed and CL40 Latency
  • Power Management Integrated Circuit
  • Intel XMP 3.0 Ready

Pros

  • 16GB RAM modules take care of all basic to mid-level computing needs
  • Intel XMP 3.0 allows you to tweak key performance setting
  • On-die ECC help ensure data integrity and reliability
  • 4800MHz DDR5 delivers 50% faster RAM speed than DDR4

Cons

  • No Heat spreader may be a cause of concern during peak demand
  • No RGB lighting for aesthetics

7. Patriot Signature Line Series DDR5

The Patriot Signature Line Series DDR5 RAM’s offerings are pretty standard. The performance is at par with similar budget DDR5 modules. Even the design follows the minimalist trend set with this class of RAM chips.

It is a given that most budget DDR5 RAM modules are sold without a heat spreader and attractive lighting. There is little else a manufacturer can cut back on. Hence, whenever you buy a low-priced DDR5, you should not expect anything more than the fundamental performance module.

Thus, in the case of budget DDR5 RAM, minimal design and standard performance are two faces of the same coin.

Consequent to minimal design, you get the standard 4800Mhz clocking speed. Expectedly, latency parameters hover around the CL40 mark. These remain consistent with similar RAM modules from other manufacturers.

You get the PMIC and on-die ECC as standard, thanks to the specifications laid down by the JEDEC.

Key Features

  • 4800MHz Clocking Speed and CL40 Latency
  • Power Management Integrated Circuit
  • 16GB (8GBX2)

Pros

  • 16GB RAM modules take care of all basic to mid-level computing needs
  • On-die ECC help ensure data integrity and reliability
  • 4800MHz DDR5 delivers 50% faster RAM speed than DDR4
  • On-die PMIC and temperature sensors help ensure efficiency and stability

Cons

  • Pricey, when compared to similar budget DDR5 RAM modules
  • No features to enhance the aesthetics of the computer
  • A relatively unknown brand can be a deterrent to novice users

8. GeIL Polaris RGB DDR5 RAM – Budget DDR5 with RGB Lighting

The GeIL Polaris RGB DDR5 RAM module is a must-have if you are into light gaming. It is among the very few, if any, that offer a couple of design elements. The foremost is the RGB lighting.

First, let’s talk about the design. The Polaris comes with a futuristic-looking RAM chip. Even get three color options to choose from. Also, there are RGB lights that you can sync for immersive gameplay and overall aesthetics. You can use Asus’s Aura Sync, MSI’s Mystic Light Sync, Gigabyte’s RGB Fusion 2.0, and more.

For performance, you get 4800MHz clocking speed and latency parameters touching CL40. It supports Intel’s XMP 3.0; thus, you get to tweak the performance.

GeIL also offers a 5200MHz 32GB DDR5 RAM module as well. This may also be worth considering, as you only pay a fraction more to get that added speed. Of course, the 4800MHz one is just as good. And if you are upgrading from a DDR4, you will anyway experience a significant performance enhancement.

GeIL also prides itself on the fact that each of its DDR5 RAM kits is tested at manufacturing. They use GeIL’s patent DYNA 5 SLT screening technology to test each kit before shipping their product.

Key Features

  • 4800MHz Clocking Speed and CL40 Latency
  • Intel XMP 3.0 support
  • 16GB (8GBX2)

Pros

  • Intel XMP 3.0 lets you tweak basic performance settings to suit your needs.
  • Individually tested RAM modules ensure you get a reliable product
  • RGB Lighting enhances the aesthetics, and you can sync with gameplay.
  • Limited Lifetime Warranty gives you protection in case of device failures

Cons

  • It is a tad bit pricier than typical budget DDR5 kits
  • Not suitable for advanced level gaming

Best Budget DDR5 RAM – Our Buying Guide

JEDEC prescribe a standard set of specifications that DDR5 RAM manufacturers need to incorporate into their products. Thus, irrespective of the brand, you will get a certain number of standard parameters. For instance, you get 4800MHz clocking speed and CL40 latency timings as the minimum specification.

DDR5 kits with higher prices deliver better numbers.

Once assured of the specification, the key considerations you must keep in mind are:

Capacity

This is the most vital consideration you need to make when buying a budget DDR5 RAM. The option ranges from 8GB to 32GB. These are offered in a variety of configurations.

Suppose you want 16GB RAM. You can choose between a single 16GB RAM module or a combination of two 8GB modules. This depends on the number of slots on your motherboard.

However, you must determine what you lay greater emphasis on, reliability or speed. An 8GBX2 setup is reliable because the second stick will still work if one stick malfunctions. Alternately, a 16GBX1 configuration will hold a slight speed edge.

We have mentioned the capacities and configurations in which they are offered.

Heat Spreaders

Heat spreaders are protective casings that manufacturers mount on the RAM module. Its purpose is to help dissipate the heat so that the RAM works efficiently even when it heats up.

The Kingston and the GeIL Polaris are great options. These two kits will ensure your work does not suffer inefficient heat management.

Intel XMP 3.0

This is an important feature to look out for. When your work demands a specific RAM configuration, you will need a RAM module that supports Intel XMP 3.0.

Therefore, the RAM modules from Kingston, Mushkin, Adata, and GeIL are excellent choices.

Warranty

A warranty for your RAM is the protection you need to mitigate the risk of device failure. Most big manufacturers stand by their products, and their warranty is implied.

However, you may seek the comfort of something more apparent. This comes with the RAM modules from GeIL and Mushkin.

Brand Name

This is another significant consideration. When you are faced with the choice of a lower price RAM of an unknown brand or a high-priced branded RAM, select the branded one. Brands are built on reputation and trust. Thus, it is worth paying a manageable price premium to get a slice of that trust.

Best Budget DDR5 RAM – Frequently Asked Question

What is CL40 Latency timing?

The RAM is laid out in a grid with multiple rows and columns. In its simplest form, Latency timing refers to the time taken to retrieve information from a specific cell (a specific location on the RAM grid). CL40 can be interpreted as 40 clock cycles to retrieve the cell. If you have noticed, we have used this format to define the latency time.

However, Latency timings are defined by five parameters. Typically, you would see a sticker on the RAM module that reads “CL40-40-40-77” or similar to this. These are different parameters that break down the process mentioned earlier about retrieving information from a specific cell.

That is a complicated discussion and beyond the scope of this article.

Can you use DDR5 RAM on a DDR4 enable motherboard?

DDR5 uses an entirely new setup. Presently, you can only use DDR5 RAM on a Z690 motherboard. Hence, your old motherboard that uses the DDR4 is not compatible with DDR5 RAM modules.

Is DDR5 good for gaming?

The simple answer to this is yes. There are several kinds of games on the market. Each game has a different requirement in terms of CPU or RAM configurations. At best, the DDR5 offers a 50% speed advantage in terms of speed over the DDR4. Thus, it is better for gaming.

Moreover, the DDR5 trumps the DDR4 in all parameters in an apple-to-apple comparison. Price is the only exception.

Why is DDR5 so expensive?

Firstly, it is a newer technology than DDR4. As seen with all newer technologies, initially, they hold a considerable price premium over their predecessors.

Next, the global shortage of semiconductor chips has been the major reason why DDR5 chips are so expensive.

Finally, the DDR5 is a newer technology that uses more components than the previous RAM version. The component cost plays a vital role in the pricing of the DDR5 RAM.

Therefore, even if you discount the first two reasons, the DDR5 will be considerably more expensive than older RAM technologies.

0 Shares:
Subscribe
Notify of
guest
Receive notifications when your comment receives a reply. (Optional)
Your username will link to your website. (Optional)

0 Comments
Inline Feedbacks
View all comments
You May Also Like